Fitting Cat Flap In UPVC Door Panel

Cat flaps allow your pet leave and come at their own pace without needing to let them in or out. They can also help stop your cat from urinating in the house.

Installing a cat flap into the door panel made of upvc is a lot easier than glass doors, however it will require some expertise and the right tools.

Take a measurement of the door

The installation of a cat flap inside the door can be a challenge but if you choose the right type of cat flap, take your time and follow the directions provided, it should not prove to be too much trouble. We will show you how to draw the shape, use an jigsaw for cutting out the door's area and then complete the job by attaching the flap to the door. This will ensure that the flap remains in place and shields the doors from the damage caused by rain and wind.

To determine the size of the cat flap you require, take a measurement of your pet's width. This will ensure that the flap is large enough that your pet can leave and enter the home without needing to open and close the door every time, yet small enough to prevent them from going too far either way.

Once you have the measurements you can determine where on the door the template should be positioned, usually this is done with an X, but some kits come with drawings that show where to drill, if yours does, then you can stick it to the door and draw a line around it. If your door has a sill or moulding at the bottom, make sure that you leave enough space between your cat and the moulding or sill.

Then put on your eye protection and a dust mask, and using a jigsaw, begin cutting along the line you penciled in. Don't press the blade too hard, as this could cause it to cut faster than you'd like it to. Set the square with a ruler to ensure that you're cutting the material properly and that the cut is a rectangle. When you are happy with the result, you are able to take the door material off.

Draw a Line

The cat flap lets you to let your pet go inside and out without worrying about unwanted visitors or unwanted gifts. It also prevents drafts and helps keep the temperature of your home steady. However, installing a cat flap in your door can seem like an intimidating task for those who haven't done it before. This can lead many to hire an expert joiner or carpenter to do the job instead. This is a viable option, however you can do it yourself if your tools are in order and the steps are adhered to.

This is much simpler to do with a wooden door, but it is still possible using upvc door panel with cat flap. However you should be cautious not to damage the doors because this will cause the door to be damaged and invalidate your warranty. First, you must examine the door's measurements to make sure it will accommodate the new cat-flap. If you have a standard uPVC panel it's easy. However, if your door is composite or a different type of door, you might need to be more careful.

The next step is to determine the height of your cat flap in upvc door panel; My Web Page,'s stomach. This is the height from the floor to the underside of the cat's stomach and you will need to find a place in the door where this measurement will fall within the range that your cat can comfortably pass through. Once you've got the information, you'll have to mark the area with a spirit level and a pencil, so that you are sure that the hole will be suitable for your cat.

Once you've marked the area, it is time to cut the hole. It is essential to be patient and use a jigsaw to ensure that the cuts are clean and smooth not uneven and rough. This could cause damage to your door. Be sure to wear safety glasses and a dust-proof mask when working with the jigsaw as dust from the saw could be hazardous to your health. After you've finished the cutting, you will need to smooth out the edges of the hole with sandpaper, so that your cat flap can be fitted easily into place.

Cut a hole

It can be difficult to install an animal flap on the door panel or double glazing cat flap glazing unit. It is tempting to tackle the task yourself, but unless have expertise in DIY, it's probably best to get an expert to complete the job for you. A botched job may not only look ugly, but also an enigma for security as well as allowing cold air to get in when the cat is outside, and hot air to escape when inside.

The first thing to do is mark the position of the hole in the door with pencil and a spirit level. This will ensure that it is properly placed and runs flush with all the other parts of the door. Make sure you have sandpaper in your possession to smooth out any rough edges.

Wear the safety equipment you require when working with the power tool. If you're worried about noise, you can purchase a cordless jigsaw which is quieter and easier.

It is crucial to only remove the material needed to fit the cat flap. A small amount of material will be required for the thickness of the the cat flap itself but cutting off more than this could cause issues and damage the doors frame.

If the door is made of upvc and features a metal panel or frame, it could interfere with the microchip flap. In this situation you'll need to make an oversize hole to ensure that the metal does not get in contact with the walls of the flap.

If you are fitting a cat flap into the frame of a double glazed windows with a metal frame then you will need to speak to a professional who will provide you with a new pane of glass with the hole for the cat flap installer flap premade inside. It is much less expensive to have this done than trying to fix the cat flap onto an existing glass pane that has not been manufactured specifically for this purpose.

Fit the Flap

Cat flaps let your pet leave and come as they please, giving them the freedom to relax inside the house when they feel like it. If you have an uPVC front door, it might be difficult to put in the cat flap. This is especially true in the event that you don't own glass panels that can be cut. If you're willing to purchase and install a new half-glazed uPVC panel, then it's possible to fit the cat flap to these doors. It's not as simple as just cutting a hole in the door however, and there are some things you'll need to take care of first to make sure it's safe.

A composite, uPVC or GRP door panel is typically composed of a thin plastic skin that is bonded to an insulating polystyrene core. The material is quite fragile and care should be taken when cutting through it to avoid damaging. This type of door comes with a template that you can use to make the hole.

After you have marked out the hole in your front door, it is time to put in the cat flap. You can purchase and install various models, from basic push-button operated ones to microchip activated units that allow only your pet. No matter which type of cat flap you pick, it's vital that your cat is able to utilize the flap with ease without getting stuck outside in the rain.

It's a good idea to select a circular fitting rather than one that is square, since circles are more securely cut into door glass. It's because square holes are more likely to break the glass when they are drilled. This is also a safer choice since you don't have to drill into the toughened glass that could break and hurt your pet or family. This is particularly crucial if you have children or elderly people in your home that might be injured by glass shards.