Fitting A Cat Flap

Fitting a cat flap can be a bit daunting but it's easy to do with the proper instructions. Decide how high you'd like your cat flap to be (normally it's at belly height). Note this on the door and then use the template included as a guide to drill.

If you have a kitten that is still a newborn then gently prop the door slightly open and allow it to go through. Reward the kitten each time it moves through.

Measure the Door

A cat flap allows your pet to move into and out of your home at any time. This can help keep your cat flap installers near me healthy as it will ensure it gets enough exercise and also be able to return inside if it is trapped outside in bad weather. This will cut down on the time you spend letting your cat out or in and also make your home secure by letting you know when it has left.

It is crucial that the flap for your cat is correctly fitted to prevent your pet from being able to escape through it or be pushed through by any other animals (e.g. dogs). You should measure the height of your pet's belly as well as the height of the doorway in your home to ensure the flap is at the right height. You can adjust the height of your flap when your cat is taller or smaller than average.

The next step is to make use of a spirit level to mark the centre of the door where you will put the flap. Utilizing the marking as a guideline, you can use the jigsaw and cut the shape of the flap in the door. After you've cut the door, sand the edges of the door to create smooth surfaces. You can then drill any fixing holes that are required.

The process of installing a cat flap isn't as complicated as you believe and it shouldn't take more than two hours for the entire job from start to the end. However, the process can be a bit more difficult in the event that you have to put it inside the door of a uPVC or composite door as these doors come in an array of thicknesses which can affect how the holes are cut and what they are fixed to. We always suggest that you call an expert if this is your first time working with glass.

Measure Your Cat

A cat flap can save you from listening to your pet's meow to let it in or out. This is especially useful if your cat is trapped in the house during all seasons while you work.

It is crucial to first measure your cat before you attempt the installation. It might seem like a simple task, but it is important to get the measurements right. Otherwise, your pet may find it difficult to use.

First of all, make sure that your cat is calm and not feeling stressed prior to taking the measurements. You will have to hold your cat in a place that they are unable to move. Also, ensure that the measuring tape is flat and not curved against their body. By keeping the measuring tape or ruler against their body from their head to the bottom of their tail can allow you to determine an exact measurement.

Once you've figured out the measurements of your cat, it's time to look at the door and decide where to put the flap. A good tip is to place the flap at the height of your cat's stomach as it will allow them to move through it with minimal effort. This will also prevent the flap from making a lot of noise when it swings back and forward.

You should consider the thickness of the upvc door panels cat flap or composite door as well. While all timber doors have a similar thickness to them, uPVC or composite doors can differ greatly in their overall design. This could make the process of the process of putting in an enclosure for your cat more difficult as you must ensure that the hole is the right size.

It is also worthwhile studying the instructions that come with the kit to locate an outline of the template that can be used to mark out the location of the hole in the door. This will help you to see where the opening needs to be and make sure that the template is correctly positioned on the door. Utilizing a spirit level to check that the template is sitting flush against the door can be very helpful.

Cut the Flap

You'll need to cut a hole in the door panel to install your cat flap before you can install it. This can be a daunting job, so it's recommended that you hire a professional to help you if you lack the skills or experience. You can also consult the instructions that come in the kit to find out how to do it properly.

To do this, you have to take a measurement of the height of your cat's or kitten's belly. Use this as an indicator point. As a rule of thumb, place the cat flap around 10-15 centimeters higher than the ground. This is the typical height of the cat's belly. This way your cat will be able to go through the flap with ease and it will also give the other cats or neighbours who are snooping an issue when trying to get in or out.

Once you have determined the best location for the cat flap to be positioned, mark this location on the door using pencil. Next, if your kit includes a template for paper, place this over the door and use the markings to drill holes in each corner of the template. You should then be able cut out the template's shape and replace it with your cat flap.

If you are installing your cat flap inside an entryway made of wood or uPVC, you can do it yourself if are comfortable with a Jigsaw. Be cautious not to cut through the vertical rails or mullions of your door. You can use a jigsaw cut the panel into a square or circle, depending on the design of your cat flap. Be patient and don't try to make the jigsaw cut faster.

After the hole has been cut then carefully insert the flap onto its new home and make sure that it's securely fixed. If the flap is fitted with screw caps, push them onto the protruding bolts. After the screws are installed then sand the rough edges and then apply sealant to any gaps. This will stop the entry of draughts into your home.

Place the Flap

If you have a simple cat flap, you can open it and encourage your pet to go through by putting a small amount of cat food on the outside of the door. You can also try pushing the cat with the help of a stick or your hands. Once your pet has become accustomed to moving through the flap, it will be able to come and go at will. This lets you let it in and out at any time it wishes.

You can fit the flap onto an UPVC or glass door although this may not be as simple as fitting one into a wood exterior door due to the fact that the UPVC doors and some glass doors aren't a uniform thickness. This can affect how you cut the opening for the flap and can also affect whether your flap is fitted correctly after it has been put in place.

Depending on the type of cat flap in bifold doors flap you pick It may be equipped with a mounting kit as well as a template that will show you exactly where to drill the holes for it. If the kit doesn't include a template, you are able to make one by yourself. It is important not to press the jigsaw too hard when cutting, so that it doesn't make a larger than necessary hole in your door.

Most cat flaps are square or rectangular in shape but there are also some which are circular, and they are usually more difficult to place. If you have a circular flap, it's essential to make sure the hole is in the correct location on your door as if it's not, your cat won't be able to use it and could be stranded out in the sun all day (or even night).

Some models of cat flap have locks which let you control the time your cat comes and goes. They are helpful if your pet is afraid of going out in the dark, or coming back in the dark. They are also useful for those who work all day. The lock can be used to allow or deny entry, and some can be locked in either direction which allows you to close the door completely, which is especially beneficial for older or ill cats who aren't keen on going out in bad weather.