10 Things We All Love About Repairs To Upvc Windows

Repairs to uPVC Windows

uPVC is a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not rust or rot.

It is important to clean and oil UPVC windows and doors regularly. This will reduce repair costs and improve the efficiency of energy.

1. Broken Glass

If the glass in your window is damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is essential to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.

Single-pane windows are relatively simple to replace and typically fit into old frames very easily. If windows with double panes are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation you'll need source some plastic spacers to aid the new pane in being able to fit correctly into the window frame.

If you're planning attempt to remove the window panes yourself, it is essential to wear appropriate safety gear, including thick gloves and protective eyewear. It is also an excellent idea to lay down a dropcloth before you start working on the glass so that any fragments of glass fall onto the fabric instead of onto the floor, where they could be trampled upon and cause further damage.

It's a great idea to cover the gap with tape after the glass has been removed. This will prevent drafts and water from entering your home until a professional arrives to repair the window. This will also act as a barrier, preventing any intruders from getting access to your home. If the gap between the door and the window is large, you might prefer a security screen that also has a window. This will provide the best of both.

2. Sagging

uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. However, over time, they can suffer from a variety of problems including sliding. A sagging window can cause problems with light, draughts, and even security. It's important to take action as soon as you notice your uPVC windows are sliding.

To repair a window that is sagging, you can try repositioning the hinges. First, you'll need to open the windows to reach the frame. With a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after having moved your hinges. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you aren't able to move the hinges you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, which causes them to loosen. It is essential to replace your seal as soon as you can to keep your uPVC window watertight and draughtproof.

uPVC handles can also become loose. Most often, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has been worn out. Fortunately, it's easy to fix the loose uPVC window handle yourself. The first step is to close your window and do a test fit. The joint at the corners of the sash should align with the joint on the casing. If it isn't, you can make use of a screwdriver to loosen the handle and return the mechanism to its original position.

3. Water Leaks

If you're waking up to wet floors and mouldy walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature inside your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or missing.

This is a relatively easy fix that can be completed by any skilled DIYer. Depending on the severity of the issue is, the old caulking may have to be removed. It is crucial to remember that when it comes to upvc window repair near me window repairs, additional resources,, do not be tempted to 'over-caulk' as this will only make the area harder to clean and decrease the efficiency of your energy usage.

Make sure that the drainage holes have no debris in them, and also ensure that the sill pan is properly angled to allow the water to drain from the window. In more extreme situations, you may have to replace the window.

Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed glass, it is more likely that the problem is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

If your upvc window repair windows are stiff to open, or slack and open with ease, it may be hinges that are at the fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.

Nearly every home in the UK will have top-hung or side-hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It's easy to change the hinges on a window, but it's easier if someone else helps you to hold the frame.

Make sure that the uPVC hinges open and close in the correct direction. Look for the arrows on each hinge to determine which direction the window should be opened.

Faulty window hinges could be the result of incorrectly opening the window a certain manner or because of inadequate installation at the factory. Sending us a photo through our website can often solve the issue. We are always happy to provide assistance.

Regular lubrication of the hinges is essential. Applying an engineering lubricant that is light to the hinges is a great way to do this. We recommend using a lubricant that does not contain solvents, such as 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window to operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. It is recommended to do this at least once a year. WD40 and other solvent-based lubricants are not recommended as they could damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a few various factors. The hinges may also become disaligned as a result of wear, creating an opening where the sash meets frame. These can be easily repaired by giving them a thorough clean, however if they are beyond repair it may be necessary to get them realigned or replaced. The interlock may be misaligned. It is located on the hinge's side, and may need to be cleaned. In certain instances, it may be necessary to replace the hinges.

The next common reason for draughts are the window seals. These are prone to wear or damaged over time, and let air escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures, and also reduce draughts.

Lastly, one of the most effective methods to reduce drafts is to use a draught excluder, these are typically fabric tubes that are filled with some type of filler. They can be put on top of your windowsill. They will keep your home warm by blocking cold air.

The windows made of upvc can keep providing excellent insulation and security to your home with regular maintenance and repairs. It is important to remember that all windows will eventually get worn out and it could be cheaper to replace them instead of fixing them. So, if you are experiencing issues with your Upvc windows, it is always best to seek professional assistance as soon as you can.